Eaton IBC-S Installation Manuals

Also see for Powerware 9390: Installation and operation manual Installation and operation manual Installation and operation manual Manual Brochure & specs

Installing Battery Cabinets3-5EATON Powerware ® 9390 Integrated Battery Cabinet (Models IBC-S and IBC-L) Installation Manual 164201536 Rev Dwww.eaton.com/powerquality1. Verify that the UPS is properly installed and secured. Refer to the appropriatePowerware 9390 UPS Installation and Operation Manual, as referenced inparagraph 1.6, for installation instructions.2. Roll the battery cabinet to an area near the left‐hand side of the UPS, as shown inFigure 3‐3.3. Remove the field kit. The field kit is attached with cable ties to the frame insidethe door. Retain the field kit for later use.NOTE When a line-up-and-match UPS system is ordered together with battery cabinets,the first battery cabinet is supplied with two cosmetic covers. The UPS cabinet,additional battery cabinets, and other ancillary cabinets are supplied without cosmeticcovers.NOTE When cabinets are properly aligned, all cabinet doors are flush.Screws from KitBracketfrom KitBattery Cabinet UPS CabinetLarge Bracket(See Figure 3‐4)Top View with Small BracketFigure 3‐3. UPS to IBC-S Joining Brackets4. If necessary, remove the cosmetic cover and hanger brackets from the left‐handside of the UPS. Save cover, screws, and brackets for later use.5. If necessary, remove the cosmetic cover and hanger brackets from the right‐handside of the battery cabinet. Save cover, screws, and brackets for later use.6. Remove the knockout plug on the bottom left side of the UPS cabinet insidepanel. Refer to Appendix A of the appropriate Powerware 9390 UPS Installationand Operation Manual, as referenced in paragraph 1.6, for the location of theknockout plug.