Eaton INDGW-X2 User Manual

Also see for INDGW-X2: Manual

Configuring ModbusInstalling the Network Management Module – 23•••••••Press OK.Close Internet Explorer and re-open it.Now you can access the address 169.254.0.1 with Internet Explorer and any other browser.2.5 Configuring Modbus2.5.1 Configuring the communication parametersAccess the web interface through Network or RNDISNavigate to Contextual help>>>Settings>>>Modbus and set the communication parameters to the desired settings.2.5.2 Available mapsAccess the web interface through Network or RNDISNavigate to Contextual help>>>Settings>>>Modbus and press the Supported MAPs button to download the MAPs.2.5.2.1 Mapping table contentFor Modbus RTU configuration refer to the section Contextual help>>>Settings>>>Modbus>>>ModbusRTU.For Modbus TCP configuration refer to the section Contextual help>>>Settings>>>Modbus>>>Modbus TCP.File is generated in real time and will take into account the device capabilities and values at the time of thegeneration.Table in the downloaded file will show all possible registers, only the one showing Available equal to True will besupported by your system.The units used on Modbus map belong to the International System of Units,temperatures are expressed in Kelvin for example.