Eaton INDGW-X2 User Manual

Also see for INDGW-X2: Manual

ProtectionContextual help of the web interface – 593.5.3.2.3 EditPress the pen icon to edit schedule shutdown and to access the settings:3.5.3.3 Access rights per profilesAdministrator Operator ViewerProtection/Scheduledshutdowns3.5.3.3.1 For other access rights3.5.3.4 TroubleshootingAction not allowed in Control/Schedule/Power outage policySymptomBelow message is displayed when you access the Control, Schedule or Power outage policy page.This action is not allowed by the UPS.To enable it, please refer to the user manual of the UPS and its instructions on how to configure the UPS settings and allowremote commands.Possible Cause1- Remote commands are not allowed due to the UPS configuration (see the action below)2- The UPS does not support remote commands.ActionRefer to the UPS user manual and its instruction on how to configure the UPS settings and allow remote commands.Example: UPS menu Settings>>>ON/OFF settings>>>Remote command>>>Enable.3.5.3.4.1 For other issuesFor other access rights, see the Information>>>Access rights per profiles section.For details on other issues, see the Troubleshooting section.