Eaton M-Max series Quick Start Manual

Also see for M-Max series: User manual Operating instructions Quick start guide

M-Max Series adjustable frequency drive28 For more information visit: www.eaton.com MN04020002EFebruary 2010Quick start wizardThe quick-start wizard guides you in the quick configuration through all important settingsthat have to be made or that you should check for your application (see A in Figure 13). Theparameters that are called during the process are listed in Table 10 on Page 32 in columnBasic (Standard Drive).The quick configuration is completed when the frequency display M1.1 is activatedautomatically. Selecting the PAR main menu again enables you to call up the parametersof the quick configuration.Besides the parameters of the Quick Configuration, system parameters S1.1 to S4.2 are alsoshown after the initial setting. With P1.1 = 0 you can select access to all parameters; the keysof the operator panel are fully functional (free parameterization, see B in Figure 13).This exits the quick-configuration and the guided setup with the quick-start assistant.The process is run from parameter to parameter.Returning is not possible here.In the quick-configuration, the OK button activates the individual parametervalues and then moves on to the next parameter. Every parameter alwaysshows the value that is set in alternating sequence. By actuating the OKbutton again, you activate the value (value flashes).In the quick-configuration, the arrow keys have a limited functionality(changing parameter values).OK