Eaton M-Max series Quick Start Manual

Also see for M-Max series: User manual Operating instructions Quick start guide

M-Max Series adjustable frequency driveMN04020002E For more information visit: www.eaton.com 33February 2010All ParametersTable 11: All ParametersWhen first switching on or after activating the default settings (S4.2 = 1) parameter P1.1must be set to 0 for access to all parameters.PNU IDAccessRightRUN Designation Value Range FactorySetting UserSettingParameter SelectionP1.1 115 ✓ Parameter range 0 = All parameters1 = Only quick configurationparameters1P1.2 540 — Application 0 = Basic1 = Pump drive2 = Fan drive3 = High starting torque0P1.3 1472 — Factory setting(WE),Country-specific(enabled and visible only in the quickstart wizard)0 = EU (50 Hz-based defaults)1 = USA (60 Hz-based defaults)0Analog InputP2.1 379 ✓ AI1, Signal range (DIP switch S2)0 = 0V/0 mA1 = 2V/4 mA0P2.2 380 ✓ AI1, minimumvalue–100.00 – 100.00% 0P2.3 381 ✓ AI1, maximumvalue–100.00 – 100.00% 100P2.4 378 ✓ AI1, filter timeconstant0.0 – 10.0s 0.1P2.5 390 ✓ AI2, Signal range (DIP switch S3)Like P2.13P2.6 391 ✓ AI2, minimumvalue–100.00 – 100.00% 0P2.7 392 ✓ AI2, maximumvalue–100.00 – 100.00% 100P2.8 389 ✓ AI2, filter timeconstant0.0 – 10.0s 0.1Digital InputP3.1 300 ✓ Start/stop logic 0 = DI1 (FWD), DI2 (REV)1 = DI1 (START), DI2 (REVERSE)2 = DI1 (Start pulse), DI2 (Stop pulse)3 = DI1 (FWD), DI2 (REV) and REAF3P3.2 403 ✓ Start signal 0 = Deactivated1 = DI12 = DI23 = DI34 = DI45 = DI56 = DI61