Eaton PV240 User Manual

Eaton Corporation Page 14 Ver 1.15. Installation of Eaton Grid-Tied PV Inverter5.1 Open the packingA. 1 x Eaton Gird-Connected PV InverterB. 1 x Mounting BracketC. 1 x Accessories Boxi. 1 x User Manualii. 6 x M4 Mounting screwsiii. 6 x Mounting anchorsiv. 2 x M4 Safety-lock screwsv. 1 x Female fault signal connectorvi. 2 x PV238 Name Plate (Only available for PV240 model)IMPORTANTFor PV240 model, user will be able to use manual function of dipswitch in order to modify power the PV240 into 3800W output.This is why there are 2 additional rating labels included in theaccessories box for the PV240 model.5.2 Visual check the PV InverterIt is important to check the Eaton grid-tied PV Inverter for any visible damage,including the LCD screen. If there are visible damages can be found, pleasecontact the dealer or supplier immediately.WARNINGDue to the weight of the inverter, it is recommended at least 2people lift the PV Inverter from the packing and also for themounting the PV Inverter on the wall.CAUTIONIt is important to use the correct lifting point to lift the PV Inverterfrom the packing, as any improper carrying and moving couldresult in serious injury or damage the unit.WarningAny modification of the PV Inverter is not permitted. Risk ofdamage can be caused by any improper modification.