Eaton PV240 User Manual

Eaton Corporation Page 23 Ver 1.1ii) Secure the edge point of mounting bracketIn order to avoid the wiring box swaying due to weather, the safetyscrews for the wiring box must be tightening. There will be two pieces ofthe M4 size screws found within accessories box. The tightening locationof mounting bracket was indicated in figure 5.4.8. Follow the belowinstructions in order to complete the tighten procedures:Figure 5.4.8: The edge point of mounting bracketWARNINGThe wiring box shall not be opened under dusty or moist weather.Working with the exposed electrical components under in moistweather is very dangerous, which might cause an electricalshock easily. In dusty weather, electrical components of thewiring box might be damaged if there is heavy dust floating withinair during serving period. Please be aware and avoid.CAUTIONIt is necessary to disconnect the DC generator and AC Utility ifthe wiring box is already wired with any DC or AC connection. Itis necessary to wait 5 minutes in order to ensure all the electricalcomponents are discharged.ESD ProtectionAn ESD glove should be worn during the cable wiring, replacingthe fuses and installing the components.iii) Turn off DC/AC switch from the wiring box as illustrated below:Figure 5.4.9: Turn off DC/AC Switch