Eaton PV240 User Manual

Eaton Corporation Page 68 Ver 1.1III) System information MessagesOperation Condition Messages DescriptionsModel Display PV2XX Inverter ModelLCD Display Lock Lock Hold the present display messageWaiting for reconnect tothe gridReconnect inxxx S The time for reconnect to the gridIV) System Fault MessagesOperation Condition Messages DescriptionsIsolation Failure IsolationFaultGround-fault of the PV-modules or failure ofsurge voltage protectionGrid Failure Grid Fault Grid measured data is beyond the specification(voltage & frequency)No Utility No Utility Utility is not availableInput Voltagetoo HighPV overvoltage Input voltage higher than the 600VGround I Fault Ground IFault Leakage current on ground conductor is too highV) Inverter Fault MessagesOperation Condition Messages DescriptionsConsistent Fault ConsistentFaultThe readings of 2 microprocessors are notconsistent. It could be caused by CPU and/orother circuit not functioning properly.Fan Lock Fan Lock All the cooling fans of the unit are locked and notfunctional (All model)Fan1 Lock Fan1 Lock Internal cooling fan of the unit is locked and notfunctional (Only for PV260 and PV270 Model)Fan2 Lock Fan2 Lock External cooling fan of unit is locked and notfunctional (Only for PV260 and PV270 Model)Temperature too high OvertemperatureThe internal temperature is higher than normallyallowed valueOutput Relay Failure Relay failure The relay between the inverter and grid is notfunctionalOutput DC Injection toohigh DC Inj high Output DC injection too highEEPROM Problem EEPROMfailure EEPROM inside has data access problem