Eaton Powerware 9315 Operation Manual

Also see for 9315: Installation and operation manual Operation manual Installation and operation manual Installation and operation manual Installation manual

Contents

Using the Monitor Panel5−2 EATON Powerware ® 9315 UPS (300–500 kVA) Operation Manual 164201119 Rev F www.powerware.com5.1 Using the LCD ScreenThe LCD screen at the top of the Monitor Panel provides an operator interface with theUPS. Figure 5-2 identifies the display fields discussed in the following sections.Uninterruptible Power SystemSystem NormalAlarm: NoneNotice: NoneMetersSystemLoad AmpsEvents Statistics Graphics SetupInput OutputBypass BatteryVAB482 VBC VCAKW416KVA433IA IB ICFREQ60.0PF0.96V540 I000Meters515484 481520512VAB482 VBC VCA484 481IA IB IC475 476473 IN000VAB480 VBC VCA480 480 FREQ60.0KVA394 KW392 PF0.99Battery04 NOV 1997 14:23:45100%PercentBCDEA FGFigure 5-2. Parts of the LCD Screen (Typical for Powerware 9315 500 480/480V Unit)A The UPS status area contains three lines that display the current state of the UPS. The first lineshows the present operational mode of the UPS. The second line shows the highest level of thecurrent active alarms, and the third line shows any notices the UPS has posted. (For moreinformation about alarms and notices, see Chapter 11, Responding to System Events.")B The battery charge box shows the percentage of battery capacity available.C The menu box shows the currently selected menu and lists the options available on that menu. Thetitle at the top of the menu box is also shown below on the menu bar (E). Press the andbuttons to scroll up and down through the options in the menu box.D The currently selected option is highlighted in the menu box. Press the and buttons to movethe highlight up or down. The data in the information area (G) changes accordingly.E The menu bar lists the titles of the menus. The title of the menu currently displayed in the menubox is highlighted. When you press the and buttons to move the highlight left or right, thedata in the menu box and the information area change accordingly.F The timestamp shows the current date and time. This date and time are recorded in the Event Logwhen a notice or alarm is activated.G The information area contains data about UPS status and operations. Select a menu option todisplay statistics or graphics.