Eaton XV400 5.7" Operating Instructions Manual

Contents

3 Safety regulations3.4 Device related hazardsMICRO PANEL XV400 5.7"/8.4" 12/2014 MN04802009Z-EN www.eaton.com 173.4 Device related hazardsDANGERExplosion hazardDeath, serious injury or material damage may occur if an electrical plug connectionis removed in a potentially explosive atmosphere during operation or if the device issubjected to hazardous knocks. Only use the device in the following environments:- Environments not subject to explosion hazards- Potentially explosive atmosphere, Zone 22 (according to ATEX 94/9/EC) Potentially explosive atmosphere, Zone 22:The ground resistance of accessible metal parts must be less than 10 9 ohms. When used in potentially explosive atmosphere, Zone 22, the environment hasto be designed to avoid any bunch discharge. Prevent the device from being subjected to hazardous knocks. Only operate the device in potentially explosive atmospheres if it is correctlymounted. Switch off the device before removing the plug connections.WARNINGLive parts in the deviceWhen the device is opened, there is a risk of electric shock if live parts are touched. The device must not be opened.WARNINGPotential equalization currentsLarge equalization currents between the protective ground systems of different de-vices may cause operational malfunctions due to signal interference and may evencause fires. If necessary, a potential equalization conductor should be installed parallel to thecable. This should have a cross-section that is a multiple of the cable shield.CAUTIONElectrostatic dischargeElectrostatic discharge may damage or destroy electronic components. Avoid contact with components (such as connector pins) that are susceptible toelectrostatic discharge. Discharge (by touching a grounded metal object) any static charge accumulatedin your body before touching the device.