Eaton XV400 5.7" Operating Instructions Manual

Contents

1 General1.1 Purpose of these Operating InstructionsMICRO PANEL XV400 5.7"/8.4" 12/2014 MN04802009Z-EN www.eaton.com 71 General1.1 Purpose of these Operating InstructionsThese Operating Instructions contain the information required for the correct and safe use of theMICRO PANELs XV400 5.7"/8.4"; MC2 5.7". The Operating Instructions are part of the devices andmust therefore be kept nearby.These Operating Instructions describe all aspects of the devices: transport, installation, commissioning,operation, maintenance, storage and disposal. The operating system and the application software arenot described.1.2 Comments about this documentPlease send any comments, recommendations or suggestions relating to this document to info-auto-mation@eaton.com.1.3 Additional documentationThe following documents may be helpful in the use of the device in addition to this document:[1] MN05010007Z-EN System Description Windows CE(operation of the Windows CE operating system on MICRO PANELs)[2] MN05010009Z-EN System Description Networks in Brief(information on networks in general and on the integration of PCs and MICRO PANELs innetworks)The documents can be downloaded from: www.moeller.net, «Support» section www.eaton.eu (search document No. via search field of the home page) www.eaton-automation.com, «DOWNLOADS» section Read Chapter 3 Safety regulations,  13 before working with the device. This containsimportant information for your personal safety. This chapter must be read and under-stood by all persons working with this device.WARNINGIncomplete copy of the Operating InstructionsWorking with individual pages of these Operating Instructions may cause damageto property or personnel by failure to observe safety-related information. Always work with the complete document.