Eaton XV400 5.7" Operating Instructions Manual

Contents

7 Maintenance and service7.2 Maintenance58 MICRO PANEL XV400 5.7"/8.4" 12/2014 MN04802009Z-EN www.eaton.com7.2 MaintenanceDevices with resistive touch are maintenance-free. However, the following work may be necessary: Cleaning of the resistive touch if contaminated. Recalibration of the resistive touch if it does not respond correctly to touch operation.The infra-red frame on devices with infra-red touch must be cleaned regularly (see Chapter 7.2.3Cleaning the infra-red touch,  59). Otherwise these devices are maintenance-free.7.2.1 Cleaning the resistive touch1 Clean the resistive touch carefully with a clean, soft, damp cloth. With stubborn contamination, spray a little cleaning agent onto the damp cloth first.7.2.2 Recalibrating a resistive touchThe resistive touch is already calibrated when delivered. However, it must be recalibrated if it does notrespond correctly to touch operation. Touch calibration, see Document «MN05010007Z-EN SystemDescription Windows CE».CAUTIONCleaning the deviceDamage to the device due to the use of pointed or sharp objects or by liquids. Do not use any pointed or sharp objects (e.g. knife) for cleaning. Do not use any aggressive or abrasive cleaning agent or solvent. Avoid any liquid entering the device (risk of short-circuit).