Eaton eNMC2 User Manual

Also see for eNMC2: User guide Installation instructions

MeterLCD interface operation – 333.5.1.1 Total Input Meter DataOn the Meter menu, scroll up or down to highlight Input . Press ENTER to display the Total Input submenu for your 1Ph, 3Ph, split-phase, or dual input ePDU. Press ENTER again to see Total Input meter data measurements. Scroll up or down to review otherTotal Input meter data measurements. After you review the data, you can press ESC to return to the Input Meter menu and selectL1, L2, or L3 to see Phase Input measurements. Press ESC to return to the previous menu.Example for 1Ph total display:Example for 3Ph second phase display :3.5.2 BranchBranch measurements include voltage data for all ePDU branches. Other branch measurements are only available on ePDUs thathave current measurement capabilities.On the Meter menu, scroll up or down to highlight Branch. Press ENTER to display the Branch submenu. Scroll up or down toreview the data for your selection. After you review the data, press ESC twice to return to the previous menu3.5.3 OutletOn the Meter menu, scroll up or down to highlight Outlet. Press ENTER to display the Outlet submenu. Scroll up or down to reviewthe data for your selection. After you review the data, press ESC twice to return to the previous menu .You are using an UNLICENSED copy of Scroll PDF Exporter for Confluence. Do you find Scroll PDF Exporter useful? Consider purchasing it today:https://marketplace.atlassian.com/apps/7019/scroll-pdf-exporter-for-confluence?tab=overview&hosting=datacenter