Eaton ephesus Arena Series Installation Instructions Manual

7EATON IB528001EN Installation instructionsInstallation Instructions - Arena SeriesLabelFigure 4.Step 3 – Make Electrical ConnectionsWARNINGNever connect the luminaire to an electrical system that is not grounded. Installing a luminaire in an ungroundedelectrical system could allow the metal housing to become energized in the event of an electrical short, resultingin the risk of electrical shock for anyone who comes into contact with the Luminaire. FAILURE TO FOLLOW THISWARNING MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.Electrical Power & Control ConnectionsWiring connections:●● Connect the incoming power wires to the Luminaire power wire. See the table below for the color designation.Luminaire power wire color DesignationBlack LineWhite Line or NeutralGreen Groundotee:N When power is turned on, the sports luminaires (Arena, Arena Pro) default to 100% on unless a different control signalis present. Prism fixtures remain off until they detect a DMX signal.Power wiring connectionsLabel HereFigure 5. ElectricalControl Cable (if applicable)Power Cable