Eaton i-on1000EX Installation Manual

Also see for i-on1000EX: Quick user guide

Installation i-on1000EXPage 28Program the SystemProgram the system to suit user requirements.Page 29 contains a summary of the Installer menuon the i-on1000EX. Please see the EngineeringGuide for a more detailed description.Note: make sure that you allocate keypadscorrectly to partitions. For more information, see“Assigning Wired Keypads to Partitions” in theEngineering Guide.Assemble and close the control unit:a) Fit the lid of the control unit into the back ofthe case (see Figure 49).b) Fit and tighten the lid fixing screw.NOTE: It is possible, for convenience, to placelinks over tamper contacts to inhibit tamper alarmduring installation. Because of this feature, makesure you test all lid tampers before completinginstallations, to ensure that no links are left fitted.Figure 49 Replacing the control unit lid.Leave the Installer menu. The red LEDs should goout, and the rim of the navigation keys glowgreen. The system is now ready to hand over tothe user.Handover to the UserInstruct the user on how to operate the system.See the Administrator’s Guide. If necessary, showthem how to set the time and date on the system.Remember to leave the Administrator’s Guide withthe user.