Eaton i-on1000EX Installation Manual

Also see for i-on1000EX: Quick user guide

Introduction i-on1000EXPage 2partitions (although it is recommended that eachzone belongs to only one partition, simply to makethe resulting system easier to program).Each partition can have a full-set level and onepart-set level. In full set, the control unit paysattention to all detectors. In part set, the controlunit ignores detectors that do not have the PartSet attribute.During installation, you can allocate keypads,sounders or outputs to any partition.For a detailed description of the Installer’sprogramming menu, please read the EngineeringGuide available from www.coopersecurity.co.uk.Installer Programming InterfaceOnce fitted and powered up, you can program thecontrol unit through any wired keypad connectedto the bus cable. The Installer menu allows you tospecify all the operating parameters for anindividual installation.If you wish, you can also program the system froma PC or laptop connected to the Ethernet port onthe control unit PCB. The control unit contains aweb page server, and you can use any webbrowser to see a complete version of the Installermenu. Please see the Web Server Setup Guidefor more instructions.Note that Eaton’s Security Business recommendusing Internet Explorer. Other browsers may notbe fully compatible with the built-in web browserinterface.In addition, it is possible to connect a PC or laptopto the mini USB port on the control unit PCB anduse Eaton’s Security Business Downloadersoftware to program the control unit.Note: Some programming options can make theinstallation non-compliant with EN50131. Therelevant options are noted in the “Installer Menu”section of the Engineering Guide.About this GuideThis guide shows the simple procedure requiredto physically install the control unit, connectkeypads, expanders and power supplies andpower up the system for the first time.When you have completed the physicalinstallation, please consult the Engineering Guidefor details of configuring the system to meet yourcustomer’s requirements. For your convenience,page 29 of this installation guide contains acondensed reference table of the Installer menu.