Eaton i-on30R Administration And User Manual

Also see for i-on30R: Installation instructions Engineering guide

Contents

User Menu OptionsPage 414. Follow the prompts. Please refer to "Adding users" on page 37 if youneed information about how to use any of the above options.Deleting usersIf you are a master or admin user, you can use the Users – Delete Useroption to delete users.Once you delete a user, the system does not respond to their access code.The control unit also deletes the identity of any proximity tag, remotecontrol or HUA transmitter assigned to the user.Note: You cannot delete User 001 (the default master user).To delete a user:1. Select Users – Delete User.2. Press  or  followed by  to select the user you wish to delete.Alternatively, enter the user number (e.g. 004) and press .You will see (for example):3. Press  to delete the user (or  if you have changed your mind).Viewing the logThe control unit keeps a log of events such as alarms and setting/unsettingactions. You can view the log as follows:1. Select View Log from the main menu.The display shows the most recent event, for example:When applicable, the event includes the associated user number (001in the above example), as described in the next section.2. If applicable, press  to see a more detailed description of the event,such as the user name (rather than user number) associated with theevent.If you need information about a log event, please contact yourinstaller.