Eaton i-on30R Administration And User Manual

Also see for i-on30R: Installation instructions Engineering guide

Contents

User Menu OptionsPage 55To edit the Contacts List:1. Select System Config – Contacts.The first recipient (contact) you are able to edit is displayed:2. Press  or  followed by  to select the recipient you want to edit.3. Press  or  followed by  to select one of the following options:Name Select this to edit the name of the recipient. Seepage 33 for details of how to enter text.Tel No 1 The first telephone number of the recipient.Tel No 2 The second telephone number of the recipient.Email The recipient's email address.IP Address The recipient's IP address.Press  when you have finished editing the setting, and if required,select another setting to edit.4. Press  several times to exit.Editing outputsMaster and admin users can use System Config – Edit Outputs to edit theon and off times of any output the installer has configured as "UserDefined".Note: Master, admin, normal and partition users can activate or deactivateuser-defined outputs at any time (see page 62).To edit an output:1. Select System Config – Edit Outputs.The first output you are able to edit is displayed:The top line shows the address and type of the output. In the aboveexample, the address is PAN>01 and the type is W (wired). Thebottom line shows the name of the output.