Eaton i-on30R Administration And User Manual

Also see for i-on30R: Installation instructions Engineering guide

Contents

User Menu OptionsPage 57Managing remote controlsMaster and admin users can use System Config – Remotes to specify thefunctions that can be carried out using remote controls. The System Config– Remotes menu contains the following options:Edit Used to edit the programming of the buttons, such asthe buttons used to set or unset the system, or operateoutputs.Delete Deletes a selected remote control.Delete All Deletes all remote controls.Unset Enables or disables the ability for all remote controls tounset the system.HUA Function Enables or disables the ability for remote controls togenerate Hold-Up Alarms (HUAs).These options are described next.Editing the programming of the buttonsYou can use System Config – Remotes – Edit to re-program buttons on aone-way remote control, or the “*” button on a two-way remote control, afterthe devices have been assigned to a user.A button can be programmed to: Set a selected part set (part-setting system only). Part set a partition (partitioned system only). Operate an output configured as "User Defined" by the installer. Full set the whole system (one-way remote control only). Unset the whole system (one-way remote control only). Full set a partition (partitioned system, one-way remote control only). Unset a partition (partitioned system, one-way remote control only).Note for one-way remote controls: If you have a part-setting (non-partitioned) system, you cannotreprogram the unset button. If you have a partitioned system, the unset button can only be used tounset some or all partitions allocated to the user.