Eaton i-on40H+ Administration And User Manual

Also see for i-on Compact: User guide Administration and User Manual Quick setup guide Administration and User Manual

User Menu OptionsPage 433. Press  or  followed by  to select the method of testing:System This option allows you to walk round the entire system andtest all the zones.Partitions (Partitioned systems only.) This option allows you to selectone or more partitions, and test only the zones within thosepartitions.Press  or  to scroll up or down the list of partitions, and to display “Yes” at the end of the bottom line to mark thepartition as one you want to test.Zones This option lets you select one or more individual zones,and test only those zones.Press  or  to scroll up and down the list of zones. Press to display “Yes” at the end of the bottom line to mark thezone as one you want to test.4. Press  to begin the test.The top line shows how many detectors remain to be tested. Thebottom line provides a list of all the detectors ready for testing (press or  to scroll through the zones):5. Walk round and trigger each detector in turn. If you have enabledChime, there is a double-tone chime when you trigger a detector.You can see which zones still need to be tested by pressing  or to scroll through the zones: an "A" is shown at the end of the bottomline for each zone that has been tested. Alternatively, you can pressand scroll through the untested zones (press again to return todisplaying all zones).6. If you wish, you can press  to finish the test early.7. Once all zones are tested, you will see (for example):