Eaton i-on40H+ Administration And User Manual

Also see for i-on Compact: User guide Administration and User Manual Quick setup guide Administration and User Manual

User Menu OptionsPage 46Testing user HUDsMaster and admin users can use Test – User HUDs to test radio hold-updevices.To carry out the test:1. Select Test – User HUDs.The following is displayed:2. Press and hold both buttons on the device you wish to test until thetransmit LED on the device flashes. If the device has a lock button,make sure you unlock the button before the test.The keypad gives a double-beep confirmation tone and you will seethe results of the test:The top line shows the name of the user the device is allocated to.The bottom line shows the strength of the signal. If the signal strengthis less than 4, contact your installer.3. Repeat step 2 for the other user hold-up devices.4. Press  to end the test.Testing proximity tagsMaster and admin users can use Test – Prox Tags to test proximity readertags.To carry out the test:1. Select Test – Prox Tags.The following is displayed:2. Hold the proximity tag against the proximity tag sensor on the keypad.