Eaton i-on40H+ Administration And User Manual

Also see for i-on Compact: User guide Administration and User Manual Quick setup guide Administration and User Manual

User Menu OptionsPage 49will generate a "Social Inactivity" alert if no monitoredzone activates over a period of 2 hours during 9am to10pm.To switch facilities on or off:1. Select System Config – Facilities On/Off .2. Use  or  to choose the facility, then  or  to switch it on or off.3. Press .Setting the date and timeYou can use System Config – Set Date & Time to set the date and time.You may need to do this if, for example, the control unit lost all power for anextended period of time.Select the option, enter the date (dd/mm/yyyy) and then the time.Note: The installer may have set up the control unit to obtain its timeautomatically from the SecureConnect service. The internal clock adjustsitself for daylight saving in Spring and Autumn.Configuring calendar sets(Not available for i-on Compact.)You can use System Config – Calendar Set to configure the control unit toset or unset the alarm system (or parts of it) at fixed times of day on aseven-day cycle. If the system is a part-setting system, you can use thisoption to full set or part set B, C or D. If the system is a partitioned system,this option allows you to full set or part set any collection of partitions.There are two basic elements that you can program within the calendar setoption: the “event” and the “exception”. An event defines an action (setting,part setting or unsetting) to occur regularly at set times and days. Anexception defines periods such as holidays when you do not want the eventto occur. The number of events and exceptions the control unit can store isdependent on the control unit model.Hint: Set up exceptions first, and then the events.Note: You should not program an event to change the system/partitiondirectly from one part set level to another. You should program anevent to unset the system/partition first, and another event to set thesystem/partition to a different part set level. For example, if event 01