GE 164D2966P126 Use And Care Manual

Also see for JKP56 Series: Use and care guide Technical service guide Owner's manual Owner's manual Owner's manual

Contents

FEATURES OF YOUR OVEN CONTROLUPPER OVENQQ9 LOWER OVENtk :A &&1. CONV. BAKE. Press this pad to select bakingwith convection.2. BAKE. Press this pad to select the bake function.3. CLEAWOFF. Press this pad to cancel all ovenoperations except Clock and Timer.4. DISPLAY. Shows the operations you haveselected, the time of day and the cooking orcleaning status.5. INCREASE. Short taps to this pad increase thetime or temperature by small amounts. Press andhold the pad to increase the time or temperature bylarger amounts.6. BROIL. Press this pad to select the broil function.7. OVEN LIGHTS. Press this pad to turn theoven lights on or off.8. AUTO SELF CLEAN. Press this pad to select theself-cleaning function. See the Operating the Self-Cleaning Oven section.9. DECREASE. Short taps to this pad decrease thetime or temperature by small amounts. Press andhold the pad to decrease the time or temperature bylarger amounts,6bbb10. STOP TIME. Use this pad along4 OVENLIGHTSwith theCOOK TIME or AUTO -SELF CLEAN pad to setthe oven to start and stop automatically at a timeyou select.11. COOK TIME. Use this pad for Timed Bake,Timed Convection Bake and Timed ConvectionRoast operations. —12. CLOCK. To set the clock, first press the CLOCKpad. Then press the INCREASE or DECREASEpad to set the time of day. Press the CLOCK padto start.13. TIMER ON/OFF. Press this pad to select thetimer function. The timer does not control ovenoperations. The timer can time up to 9 hours and55 minutes.To set the timer, first press the TIMER ON/OFFpad. Then press the INCREASE or DECREASEpad to change the time.To cancel the timer, press and hold the TIMERON/OFF pad until the word “TIMER” disappearsfrom the display.14. PROBE UPPER OVEN. Press this pad whenusing the probe to cook food (upper oven only).15. CONV. ROAST. Press this pad to select roastingwith convection.If “F-and a number” flash in the display andthe oven control signals, this indicates functionerror code. Press the CLEAWOFF pad. Allowoven to cool for one hour. Put the oven back intooperation. If function error code repeats,disconnect power to the oven and call for service. —