TruVision DVR 40 User Manual 5Setting up a PTZ dome cameraUse the USB mouse provided or the optional KTD-405 keypad for local telemetry control. If using theTVR 40 over a network, use the web browser to control the PTZ dome cameras.The supported protocols are: GE, Pelco-D, and Pelco-PFor information on setting up the PTZ protocols and presets, see “PTZ settings” on page 82.Connect a TVR 40 to a PTZ dome cameraUse the input/output box that is supplied with the TVK-505U keypad to connect both a PTZ domecamera and a keypad to the TVR 40. See Figure 5 below.Figure 5: Connecting a TVR 40 to a PTZ dome cameraConfigure the PTZ protocols for GE Security camerasBefore the PTZ cameras are assembled in their housings, set their protocol and address DIP switchesfor the TVR 40. See Table 1 below for the different GE Security’s PTZ camera configurations.If you are using PTZ cameras from another company, please refer to their configuration instructions.Table 1: Configuring GE Security PTZ camerasCamera Switch settingTruVision Dome12X PTZ: IndoorDomeProtocol DIPswitches000000RS-485communication DIPswitches0000000000Camera ID DIPswitches00001. Protocol DIP switches; 2. RS-485 communicationDIP switches; 3. Camera site ID DIP switches
