TruVision DVR 40 User Manual 51b. Go to the Record Camera check boxes and select the cameras from which you want to beable to record a motion alarm. Press Enter, or left-click the mouse, to enable the option. Pressor click again to disable.Note: For the cameras to be able to record a motion alarm, they must first be setup for motionrecording. This is done in the Recording menu. See“Setting up a camera’s recording schedule” on page63 for more information.c. Go to Alarm Schedule and select when you want the TVR 40 to respond to a motion alarm.You can select up to seven days in a week and up to four time periods for each a day.Note: The four daily time periods cannot overlap.d. Go to the notification options and press Enter or left-click the mouse to enable () or disablehow you want the TVR 40 to respond to a motion alarm during live mode.Table 9: Notification options on how to respond to a camera tamper alarmNotification option DescriptionAlarm Out Alarm Out is activated. Up to four alarm outputs can be enabled.Buzzer An audible alarm soundsTCP Alarm information is sent to the remote IP (see “Advanced IP settings” onpage 69for more information)Full Screen The alarm channel will be displayed on screenEmail Alarm information is sent to an e-mail address (see “E-mail settings” onpage 68 for more information)The TVR 40 returns to live mode when there is no longer a motion alarm.e. If you want to copy the periods from one camera to another, go to the Copy to list box andselect which day you want to copy to and then select Copy.
