34 TruVision DVR 40 User ManualCaution: If there is a power failure during setup, you will loose all user-modified settings. The systemwill return to the programmed settings.Changes to screen settings can be entered in various ways as shown in Table 6 below.Table 6: Types of controlControl Function DescriptionCheck box Select either enable () or disable (empty).Press the joystick to toggle between them or left-clickthe mouse.List box Select one of the listed options.Front panel: Move the joystick up or down to select anoption. Press the joystick to accept changes made in thelist box.IR remote control: Press the up or down arrows to selectan option. Press OK to accept changes made in the listbox.Mouse: Position the mouse cursor on the list box arrowsand left-click the mouse to scroll through the options.Edit box An edit box lets you type characters to set the value ofan option. Click the box and an on-screen keyboard willappear. Depending on the type of information required,the on-screen keyboard will be numeric oralphanumeric.This function can only be done using the mouse.Left-click the mouse. A numeric or alphanumeric on-screen display appears. Select the characters required.When completed, left-click the mouse on the menuscreen to accept changes.Setup button Execute a function or enter into the next submenu.A setup button is inactive (grey) until its parameteroption is enabled.Turning off the TVR 40Turn off the power switch located on the back of the unit.
