TruVision DVR 40 User Manual 19To activate/deactivate the on-screen status barFront panel/remote control Press the F2 button on the front panel to activate or deactivate the status bar.Mouse Right-click the mouse and select Status Bar from the menu.Selecting a monitorThe TVR 40 can be connected to up to two monitors. However, only one monitor can be controlled ata time. You can select from which monitor to display the camera views in live mode.To switch between monitors A and BFront panel Press buttons A or B to switch between monitors A and B.IR remote control Press buttons Mon A or Mon B to select between monitors A and B.Mouse Right-click the mouse and select Swap Monitor from the menu shown.Viewing in multiscreenThe 16-channel TruVision DVR 40 User Manual has five multiscreen display formats availableincluding full screen. The eight-channel TruVision DVR 40 User Manual has four multiscreen displayformats.A cameo is any cell in a multiscreen display. A camera picture can only be shown in one cameo at atime. To change the order of cameras in the cameos, see “To setup multiscreen and dwell time” onpage 41”.To view a full screen displayFront panel Press the numeric button that corresponds to the camera number. For example,press button 10 to preview camera number 10.IR remote control Press two number buttons that corresponds to the camera number. For example,press buttons 0 and 2 to preview camera number 02.Mouse Right-click the mouse and select Camera from the menu shown. Select the camerarequired.
