GE Multilin D60 Line Distance Protection System 5-1535 SETTINGS 5.5 FLEXLOGIC5INPUTS/OUTPUTS:Contact outputs,voltage(from detector onform-A output only)Cont Op 1 VOnCont Op 2 VOn(will not appear unless ordered)(will not appear unless ordered)Cont Op 1 VOffCont Op 2 VOff(will not appear unless ordered)(will not appear unless ordered)INPUTS/OUTPUTSDirect inputsDIRECT INPUT 1 OnDIRECT INPUT 32 OnFlag is set, logic=1Flag is set, logic=1INPUTS/OUTPUTS:Remote double-point status inputsRemDPS Ip 1 BADRemDPS Ip 1 INTERMRemDPS Ip 1 OFFRemDPS Ip 1 ONAsserted while the remote double-point status input is in the bad state.Asserted while the remote double-point status input is in the intermediatestate.Asserted while the remote double-point status input is off.Asserted while the remote double-point status input is on.REMDPS Ip 2... Same set of operands as per REMDPS 1 aboveINPUTS/OUTPUTS:Remote inputsREMOTE INPUT 1 OnREMOTE INPUT 2 OnREMOTE INPUT 3 OnREMOTE INPUT 32 OnFlag is set, logic=1Flag is set, logic=1Flag is set, logic=1Flag is set, logic=1INPUTS/OUTPUTS:Virtual inputsVirt Ip 1 OnVirt Ip 2 OnVirt Ip 3 OnVirt Ip 64 OnFlag is set, logic=1Flag is set, logic=1Flag is set, logic=1Flag is set, logic=1INPUTS/OUTPUTS:Virtual outputsVirt Op 1 OnVirt Op 2 OnVirt Op 3 OnVirt Op 96 OnFlag is set, logic=1Flag is set, logic=1Flag is set, logic=1Flag is set, logic=1LED INDICATORS:Fixed front panelLEDsLED IN SERVICELED TROUBLELED TEST MODELED TRIPLED ALARMLED PICKUPLED VOLTAGELED CURRENTLED FREQUENCYLED OTHERLED PHASE ALED PHASE BLED PHASE CLED NEUTRAL/GROUNDAsserted when the front panel IN SERVICE LED is on.Asserted when the front panel TROUBLE LED is on.Asserted when the front panel TEST MODE LED is on.Asserted when the front panel TRIP LED is on.Asserted when the front panel ALARM LED is on.Asserted when the front panel PICKUP LED is on.Asserted when the front panel VOLTAGE LED is on.Asserted when the front panel CURRENT LED is on.Asserted when the front panel FREQUENCY LED is on.Asserted when the front panel OTHER LED is on.Asserted when the front panel PHASE A LED is on.Asserted when the front panel PHASE B LED is on.Asserted when the front panel PHASE C LED is on.Asserted when the front panel NEUTRAL/GROUND LED is on.LED INDICATORS:LED testLED TEST IN PROGRESS An LED test has been initiated and has not finished.LED INDICATORS:User-programmableLEDsLED USER 1 Asserted when user-programmable LED 1 is on.LED USER 2 to 48 The operand above is available for user-programmable LEDs 2 through 48.PASSWORDSECURITY ACCESS LOC SETG OFFACCESS LOC SETG ONACCESS LOC CMND OFFACCESS LOC CMND ONACCESS REM SETG OFFACCESS REM SETG ONACCESS REM CMND OFFACCESS REM CMND ONUNAUTHORIZED ACCESSAsserted when local setting access is disabled.Asserted when local setting access is enabled.Asserted when local command access is disabled.Asserted when local command access is enabled.Asserted when remote setting access is disabled.Asserted when remote setting access is enabled.Asserted when remote command access is disabled.Asserted when remote command access is enabled.Asserted when a password entry fails while accessing a password protectedlevel of the D60.Table 5–17: D60 FLEXLOGIC OPERANDS (Sheet 10 of 11)OPERAND TYPE OPERAND SYNTAX OPERAND DESCRIPTION
