F-2 G30 Generator Protection System GE MultilinF.1 CHANGE NOTES APPENDIX FF5-18 5-18 Add Added Syslog Format section5-26 5-26 Add Added Far-End Fault Indication (FEFI) section5-112 5-112 Update Updated FlexLogic operands table5-165 5-165 Add Added Split Phase Function setting to enabled and disable the function5-174 5-174 Update Updated Figure 5-81 Negative-Sequence Overvoltage Scheme LogicA- A- Update Updated FlexAnalog tableB- B- Update Updated Modbus memory map and F codesF-6 F-6 Update Updated product warranty from 24 months to 10 yearsTable F–3: MAJOR UPDATES FOR G30 MANUAL REVISION Y3PAGE(Y2)PAGE(Y3)CHANGE DESCRIPTION-- xi Add Added battery disposal information as chapter 0-- -- Add Added CT failure feature to Table 2-2 Other Device Functions, to chapter 5 Settings > ControlElements > Monitoring Elements > CT Failure Detector, and Appendix B table F124 List ofElements as bitmask element 246 CT Failure1-1 1-1 Add Added General Cautions and Warnings to section 1.1.12 2 Update Updated several specifications5-225 5-225 Add Reinserted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,meaning the Settings > Input/Outputs > Remote Devices settingsTable F–4: MAJOR UPDATES FOR G30 MANUAL REVISION Y2PAGE(Y1)PAGE(Y2)CHANGE DESCRIPTIONAll All Update Minor changes throughout documentAll All Delete Deleted CPU options U and V1-1 1-1 Update Updated Figure 1-1 Rear Nameplate3-8 3-8 Update Updated Figure 3-10 Rear Terminal ViewTable F–5: MAJOR UPDATES FOR G30 MANUAL REVISION Y1 (Sheet 1 of 2)PAGE(X2) PAGE(Y1) CHANGE DESCRIPTIONAll All Delete Deleted content pertaining to Ethernet switchTitle Title Update Changed part numbers. Updated address and contact information.1-1 1-1 Update Updated address and contact information2- 2- Add Added CPU options T,U, and V to order code table2- 2- Delete Removed E, G, H, J, S from CPU options from order code tables2-9 2-9 Delete Deleted 9S, 2S, 2T from replacement module order code Tables 2-7 and 2-82-19 2-19 Update Updated Ethernet fiber table in section 2.2.8 Communications3-9 3-9 Update Updated Figures 3-12 to 3-14 Typical Wiring Diagrams3-24 3-24 Update Deleted references to COM 1 RS485 port in section 3.2.9 CPU Communication Ports. Revisedtext and Figure 3-26 CPU Module Communications Wiring to include only modules T, U, V insection 3.2.9a.5-1 5-1 Update Updated the front panel main menu to include the CyberSentry security menu5-15 5-15 Update Update Communications main menu to remove the SNTP Protocol submenuTable F–2: MAJOR UPDATES FOR G30 MANUAL REVISION Y4 (Sheet 2 of 2)PAGE(Y3)PAGE(Y4)CHANGE DESCRIPTION
