GE JGS968 Owner's Manual

Also see for Profile JGS968 SERIES: Dimensions and installation information Technical service guide Installation instructions Owner's manual Installation instructions

Contents

GE JGS968 Owner's Manual Manual pdf 35 page image

GEAppliances.comStainless Steel Surfaces (on some models)Do not use a steel wool pad; it willscratch the surface.To clean the stainless steel surface, usewarm sudsy water or a stainless steelcleaner or polish. Always wipe the surfacein the direction of the grain. Follow thecleaner instructions for cleaning thestainless steel surface.To inquire about purchasing stainless steelappliance cleaner or polish, or to find thelocation of a dealer or IV]abeParts Storenearest you, please call our toll-freenumber:National Parts Center1.800.626.2002 (U.SJ1.800.661.1616 (Canada)GEAppliances.comPainted SurfacesPainted surfaces include the top and sidesof the door, and the drawer front. Cleanthese with soapand water or a vinegar andwater solution.Do not use commercial oven cleaners,cleaning powders, steel wool or harshabrasives on any painted surface.Center ventOven VentThe oven is vented through an opening inthe cooktop under the grille.Never cover the opening with aluminumfoil or any other material. This wouldprevent the oven vent from workingproperly.Control PanelIf desired,the touch pads may be turnedoff before cleaning.See the Control Lockout section.Clean up splatters with a damp cloth.You may also use a glass cleaner.Remove heavier soil with warm soapywater. Do not use abrasives of any kind.Turn on the touch pads after cleaning.Oven floor Removable Oven FloorTo remove the oven floor for easiercleaning:FT] Remove the oven door using theinstructions in the Lift-Off Oven Doorsection.[] Grasp oven floor atthe rear fingerslots on each side, lift it up, push itback and pull it out.[] Clean the oven floor with warm soapywater.IMPORTANT:Always replace theremovable floor before the next use.35