6-6 L30 Line Current Differential System GE Multilin6.2 STATUS 6 ACTUAL VALUES6b) STATISTICSPATH: ACTUAL VALUES STATUS REMOTE DEVICES STATISTICS REMOTE DEVICE 1(16)Statistical data (two types) for up to 16 programmed remote devices is shown here.The StNum number is obtained from the indicated remote device and is incremented whenever a change of state of atleast one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated remote device and is incrementedwhenever a GSSE message is sent. This number will rollover to zero when a count of 4 294 967 295 is incremented.6.2.10 CHANNEL TESTSPATH: ACTUAL VALUES STATUS CHANNEL TESTSThe status information for two channels is shown here. A brief description of each actual value is below: REMOTE DEVICE 1REMOTE DEVICE 1StNum: 0MESSAGE REMOTE DEVICE 1SqNum: 0 CHANNEL TESTSCHANNEL 1STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 1 LOSTPACKETS: 0Range: 0 to 65535 in steps of 1. Reset count to 0 throughthe COMMANDS CLEAR RECORDS menu.MESSAGE CHANNEL 1 LOCALLOOPBCK STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 1 REMOTELOOPBCK STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 1LOOP DELAY: 0.0 msMESSAGE CHANNEL 1 ASYMMETRY:+0.0 msRange: –10 to 10 ms in steps of 0.1MESSAGE CHANNEL 2STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 2 LOSTPACKETS: 0Range: 0 to 65535 in steps of 1. Reset count to 0 throughthe COMMANDS CLEAR RECORDS menu.MESSAGE CHANNEL 2 LOCALLOOPBCK STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 2 REMOTELOOPBCK STATUS: n/aRange: n/a, FAIL, OKMESSAGE CHANNEL 2LOOP DELAY: 0.0 msMESSAGE CHANNEL 2 ASYMMETRY:+0.0 msRange: –10 to 10 ms in steps of 0.1MESSAGE VALIDITY OF CHANNELCONFIGURATION: n/aRange: n/a, FAIL, OKMESSAGE PFLLSTATUS: n/aRange: n/a, FAIL, OK
