GE Multilin L30 Line Current Differential System 6-96 ACTUAL VALUES 6.2 STATUS66.2.16 ETHERNET SWITCHPATH: ACTUAL VALUES STATUS ETHERNET SWITCHThese actual values appear only if the L30 is ordered with an Ethernet switch module (type 2S or 2T). The status informa-tion for the Ethernet switch is shown in this menu.• SWITCH 1 PORT STATUS to SWITCH 6 PORT STATUS: These values represents the receiver status of each port onthe Ethernet switch. If the value is “OK”, then data is being received from the remote terminal; If the value is “FAIL”,then data is not being received from the remote terminal or the port is not connected.• SWITCH MAC ADDRESS: This value displays the MAC address assigned to the Ethernet switch module. ETHERNET SWITCHSWITCH 1 PORTSTATUS: OKRange: FAIL, OKMESSAGE SWITCH 2 PORTSTATUS: OKRange: FAIL, OK↓MESSAGE SWITCH 6 PORTSTATUS: OKRange: FAIL, OKMESSAGE SWITCH MAC ADDRESS:00A0F40138FARange: standard MAC address format
