GE Monogram ZET1P Owner's Manual

Also see for Monogram ZET1P: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

GE Monogram ZET1P Owner's Manual Manual pdf 30 page image

30Special FeaturesWall OvenSpecialfeatures ofyour ovencontrolYour oven has additional Special Features that youmay choose to use.They remain in the control’s memory untilthe steps are repeated. The Special Featureswill remain in memory after a power failure.Either the Oven Mode knob and/or theTemperature knob must be turnedto OFF.On double oven models, either the Oven Mode knob orthe Temperature knob will have to be turned to OFF foreach oven.NOTE: While in the Special Features mode, if theMini-Knob is not pushed to enter a choice after 60seconds, the mode will be cancelled (without changes)and the time of day will return to the display.The following are the features and how youmay activate them.Tones atthe end of atimed cycleAt the end of a timed cycle, 3 short beeps will soundfollowed by one beep every 6 seconds until the TIMERbutton is pushed. This continuous 6-second beep may becancelled. To cancel the 6-second beep:1 Push and hold the PROBE and DELAY STARTbuttons at the same time for 4 seconds until thedisplay shows SF (Special Features).2 Push the TIMER button to choose between:con SF bEEP – Continuous Beeps – Reminderbeeps will sound after a timed cycle has endeduntil the TIMER button is pushed.SF bEEP – No beeps – The reminder beepsafter a timed cycle is cancelled.3 Push the Mini-Knob to enter your choice.4 Push and hold the Mini-Knob for 5 secondsto exit SF (Special Features) and return to thetime of day clock.OventhermostatadjustmentYou may find that your new oven cooks differently thanthe one it replaced. Use your new oven for a few weeks tobecome more familiar with it. If you still think your newoven is too hot or too cold, you can adjust the thermostatyourself.To adjust the oven thermostat:1 Push and hold the PROBE and DELAY STARTbuttons at the same time for 4 seconds until thedisplay shows SF (Special Features).2 Push the PROBE button. A “0” will show in thedisplay.On double wall oven models, a “0” will show inboth the upper and lower oven displays. Push thePROBE button a 2nd time (“UPPER” will show inthe display) to set the upper oven, and push PROBEa 3rd time (“LOWER” will show in the display) toset the lower oven.3 Turn the Mini-Knob to adjust the oventhermostat up to 35°F hotter or (-) 35°F coolerin 1°F increments.4 Push the Mini-Knob to enter your choice.3. Mini-KnobPush toenter choice2. Push to choose.Double oven display shown.1. Push and hold at the same time to enter/exit SF.Double oven display shown.5 Push and hold the Mini-Knob for 5 secondsto exit SF (Special Features) and return to thetime of day clock.Do not use thermometers, such as those found ingrocery stores, to check the temperature setting ofyour oven. These thermometers may vary 20–40degrees.NOTE: This adjustment will only affect bakingtemperatures; it does not affect broiling, convectionor self-cleaning temperatures. The adjustment willbe retained in memory after a power failure.3. Mini-KnobPush toenter choice2. Push to choose.1. Push and hold at the same time to enter/exit SF.NOTE: On double oven models, this cancels theend-of-cycle tone for both ovens.