GE Monogram ZET1P Owner's Manual

Also see for Monogram ZET1P: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

GE Monogram ZET1P Owner's Manual Manual pdf 35 page image

35Care and CleaningWall OvenThe door is very heavy. Be careful when removingand lifting the door.Do not lift the door by the handle.To remove the door:1 Fully open the door.2 Pull the hinge locks down toward the doorframe, to the unlocked position. A tool, suchas a small flat-blade screwdriver, may berequired.3 Firmly grasp both sides of the door at the top.4 Close door to the door removal position,which is most of the way and lift it up and outuntil the hinge arm is clear of the slot.To replace the door:1 Firmly grasp both sides of the door at the top.2 With the door at the same angle as theremoval position, seat the indentation of thehinge arm into the bottom edge of the hingeslot. The notch in the hinge arm must befully seated into the bottom of the slot.3 Fully open the door. If the door will not fullyopen, the indentation is not seated correctly inthe bottom edge of the slot.4 Push the hinge locks up against the frontframe of the oven cavity, to the lockedposition.5 Close the oven door.Lift-offovendoor—removalHinge armIndentationBottomedge ofslotRemoval positionHinge lockSlotPull hinge locks down to unlockHingelockHingearmPush hinge locks up to lockProbe The temperature probe may be cleaned withsoap and water or a soap-filled scouring pad.Cool the temperature probe before cleaning.Scour stubborn spots with a soap-filled scouringpad, rinse and dry.Do not immerse the temperature probe in water.Do not store the temperature probe in the oven.