GE Profile PDW8200 Series Technical Service Manual

Also see for Profile PDW8200 Series: Owner's manual Installation instructions Owner's manual Installation instructions Owner's manual

– 5 –Control Panel FeaturesThroughout this manual, features and appearance may vary from your model.Control SettingsStatus Indicator LightsThe Status display tells you what’s happening while the dishwasher is in operation and may flash,indicating a malfunction (see page 6). The lights will comeON indicating the sequence ofoperation the dishwasher is in.SENSING Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water.The dishwasher will adjust the selected cycle to achieve optimal performance.WASHING Displayed during prewash and main wash periods.RINSING Displayed during rinse periods.DRYING Displayed duringHEATED DRY.SANITIZED Displayed when cycle has met sanitization conditions. Light remainsON until door is opened.CLEAN Displayed when a wash cycle is complete. The light will remainON until door is opened.Time Remaining Display (on some models)Displays the minutes remaining until the cycle is complete. The display may adjust the remainingtime while the Sensing light is on.SelectionsThe light above the selected pad will be ON to indicate which WASH CYCLE has been selected.ANTI-BACTERIA Heavy 10.0 gal., 93 min.Medium 8.6 gal., 90 min.Light 7.2 gal., 90 min.This cycle raises the water temperature in the final rinse to sanitize your dishware. The cyclelength will vary depending on the temperature of your inlet water.NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle isinterrupted during or after the main wash portion or if the incoming water temperature is so lowthat adequate water heating cannot be achieved, the sanitizing conditions may not be met. Inthese cases, the sanitized light will not illuminate at the end of the cycle.NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.1216245338TIME REMAINING