GE ZET1038 Owner's Manual

Also see for Monogram ZET1038: Owner's manual Owner's manual Installation instructions Owner's manual Installation instructions

Contents

GE ZET1038 Owner's Manual Manual pdf 11 page image

11Clock and TimerWall OvenDouble oven clock and timer (Pro style knob shown)Single oven clock and timer (Euro style knob shown)Using theclock andtimerWhen you first turn on the power to your oven,or after a power failure, the display will showall 8’s, then dashes and the set clock symbol.To set or change the time of day, press theCLOCK button. The control will beep. The setclock symbol will appear in the display.Press the increase “” or decrease “” button.If the increase “” or decrease “” button ispressed and released, it will change the time inone minute increments. If the increase “” ordecrease “” button is pressed and held, thetime will change in 10 minute increments.Once the clock is set, press the CLOCK buttonagain. The control will beep and the set clocksymbol will disappear.To check the time of day when the timer is inuse, press the CLOCK button. The time of daywill be displayed briefly and then will returnto the timer function.The timer button does not control ovenfunctions. The timer may be used as aconvenient kitchen timer.To set, press the TIMER button. The controlwill beep. The display will show “:00” and thewords SET TIMER.Press the increase “” or decrease “” buttonto set the amount of time desired.If the increase “” or decrease “” button ispressed and released, it will change the time inone minute increments. If the increase “” ordecrease “” button is pressed and held, thetime will change in 10 minute increments.The timer will start automatically. The colonblinks when the timer starts counting down.The word TIMER will remain in the displayduring the countdown. The timer will countdown in minutes until the last minute, then itwill count down in seconds.When timing is complete, the word TIMERwill blink and the control will beep threetimes. The display will return to the time ofday or any active programmed function andthe control will beep twice every 10 secondsuntil any button is touched.To cancel the timer, press the TIMER buttononce. If no time is set, the timer cancels itselfafter approximately 5 seconds. The time of dayis then displayed.