Garmin Apollo CNX80 Installation Manual

Also see for Apollo CNX80: User Newsletter User Newsletter Supplemental Flight manual Pilot's guide Data list

Appendix E – Acceptable Aircraft by EvaluationApollo CNX80 Installation Manual 560-0982-00 Rev D E-1APPENDIX E - ACCEPTABLE AIRCRAFT BY EVALUATIONIn certain instances, aircraft on the Approved Model List have a center radio stack located outside of theacceptable field-of-view defined herein. For these particular installations, additional FAA approval will berequired. Below is a listing of such aircraft that have already been evaluated by the FAA and determined tobe acceptable. No further approval will be required for these aircraft provided the criteria in theInstallation Requirements column are satisfied by the installation.Aircraft Make and ModelDesignation Installation RequirementsRaytheon (Beech)E33, E33A, E33C, F33,F33A, F33C, G33The CNX80 must be installed in the manufacturer’s provided avionicsstack. External CDI/HSI source selection annunciation is required. TheCDI/HSI source select annunciation must be installed in accordance with2.5.3.2.35-B33, 35-C33, 35-C33A,P35, S35, V35A, V35BThe CNX80 must be installed in the manufacturer’s provided avionicsstack. External CDI/HSI source selection annunciation is required. TheCDI/HSI source select annunciation must be installed in accordance with2.5.3.2.36, A36, A36TC, B36TCThe CNX80 must be installed in the manufacturer’s provided avionicsstack. External CDI/HSI source selection annunciation is required. TheCDI/HSI source select annunciation must be installed in accordance with2.5.3.2.D55, D55A, E55, E55AThe CNX80 must be installed high enough in the manufacturer’s providedavionics stack so that there is a clear, unobstructed view of the display.External CDI/HSI source selection annunciation is required. The CDI/HSIsource select annunciation must be installed in accordance with 2.5.3.2.56TC, A56TCThe CNX80 must be installed high enough in the manufacturer’s providedavionics stack so that there is a clear, unobstructed view of the display.External CDI/HSI source selection annunciation is required. The CDI/HSIsource select annunciation must be installed in accordance with 2.5.3.2.58, 58A, 58P, 58PA, 58TC,58TCAThe CNX80 must be installed high enough in the manufacturer’s providedavionics stack so that there is a clear, unobstructed view of the display.External CDI/HSI source selection annunciation is required. The CDI/HSIsource select annunciation must be installed in accordance with 2.5.3.2.95-55, 95-A55, 95-B55, 95-B55A, 95-C55, 95-C55AThe CNX80 must be installed high enough in the manufacturer’s providedavionics stack so that there is a clear, unobstructed view of the display.External CDI/HSI source selection annunciation is required. The CDI/HSIsource select annunciation must be installed in accordance with 2.5.3.2.