Garmin Apollo CNX80 Installation Manual

Also see for Apollo CNX80: User Newsletter User Newsletter Supplemental Flight manual Pilot's guide Data list

Post-Installation Configuration & Checkout3-14 560-0982-00 Rev D Apollo CNX80 Installation ManualTable 3-3 – Lamp Output Test ItemsDisplayLabel Signal NameConnector -Pin NotesMSG Message Annunciate P5-64PTK Parallel Track Annc P5-62SUSP Suspend Annunciate P5-63APR Approach Annunciate P5-61LOI LOI Annunciate P5-65ALT Altitude Alert Annc P5-69PAA Precision Appr P5-68TRM Term Mode Annc P5-67WPT Waypoint Annunciate P5-66BCKCRS Back Course Out P7-15GPSIND GPS Indicator Out P7-17 The GPSIND and NAVIND toggle, so one is always ONNAVIND NAV Indicator Out P7-18 The GPSIND and NAVIND toggle, so one is always ONDR Dead Reck Annunciate P5-60For each annunciator that is used, verify proper operation by turning the annunciator ON and OFF.Press the TEST or BACK smart key to return to the Ground Maintenance Test menu.3.3.1.1.5 Display TestThe Display Test function displays various test patterns and can be used to verify the CNX80 displayoperation. While on the Ground Maintenance main TEST menu page, press the NEXT PAGE line selectkey, followed by the DISPLAY line select key to go to the Display Test page. Turn the outer knob while onany Test Pattern page to display the next Test Pattern Page in the sequence. The order of test pages isFonts 1, Fonts 2, Fonts 3, Bitmaps, Red, Green, Blue, White, Black, White on Black, and Black on White.The first available display test screen is shown in Figure 3-15.Figure 3-15 - Display Test Initial ScreenPress the TEST or BACK smart key to return to the Ground Maintenance Test menu.