Garmin Apollo CNX80 Installation Manual

Also see for Apollo CNX80: User Newsletter User Newsletter Supplemental Flight manual Pilot's guide Data list

Installation Procedures2-34 560-0982-00 Rev D Apollo CNX80 Installation ManualThe data output on the ARINC 429 output port depends upon the configuration (refer Table 2-10. Belowis a list of the possible configurations and the labels output for each one. The CNX80 Equipment Hex IDis 02 for all configurations.1. EFIS 4292. GAMA 4293. GAMA Graphics 429NOTEFor the initial version of the CNX80 only configuration 1 (EFIS 429) is supported.Table 2-10 - ARINC 429 Output LabelsLabel No. Parameter Name 1 2 3001 Distance To Go (BCD) ● ● ●002 Time To Go (BCD) ● ● ●012 Ground Speed (BCD) ● ● ●041 Set Latitude (BCD) ● ●042 Set Longitude (BCD) ● ●074G Data Record Header ● ●075G Active Wpt From/To Data ● ●100 Selected Course 1 ●100G Selected Course 1 ● ●113G Message Checksum ● ●114 Desired Track (True) ● ● ●115 Waypoint Bearing (True) ● ● ●116 Cross Track Distance ●116G Cross Track Distance ● ●117 Vertical Deviation ● ●121 Horizontal Command (To Autopilot) ● ● ●125 Greenwich Mean Time (BCD) ● ● ●147G Magnetic Variation ● ●150 UTC (Binary) ● ●204 Baro Corrected Altitude ● ● ●251 Distance To Go ●251G Distance To Go ● ●252 Time To Go ● ●260G Date (BCD) ● ●261G GPS Discrete Word 1 ● ●275G LRN Status Word 1 ● ●300G Station Declination, Type, and Class ● ●301G Message Characters 7-9 ● ●303 Message Length/Type/Number ● ●304G Message Characters 1-3 ● ●305G Message Characters 4-6 ● ●306G NAV/Waypoint/Airport Latitude ● ●307G NAV/Waypoint/Airport Longitude ● ●310 Present Position Latitude ● ● ●