Garmin G3X Pilot’s Guide190-01115-00 Rev. G 139GPS NavigationSystemOverviewFlightInstruments EISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilot Annun/Alerts Appendix IndexIf duplicate entries exist for the entered facility name or location, additional entriesmay be viewed by continuing to turn the FMS Joystick during the selection process.If duplicate entries exist for an identifier, a Duplicate Waypoints Window is displayed.Press the ENT Key to move the cursor to the Duplicate Waypoints Window.Waypoint Information Window-Duplicate IdentifierDuplicateWaypointsWindowSelecting a runway:1) With the Waypoint (WPT) Page displayed, press the INFO Softkey.2) Press the FMS Joystick to activate the cursor.3) Turn the FMS Joystick clockwise to begin entering a waypoint identifier forthe desired runway (turning it counter-clockwise brings up the waypointselection submenu - press the CLR Key or the FMS Joystick to remove it),or move the FMS Joystick to select the facility name, or city field.4) Press the ENT Key. Full-Screen: continue to Step 7.5) Press the RUNWAY Softkey (split-screen only).6) Press the FMS Joystick to activate the cursor (split-screen only).7) Move the FMS Joystick to place the cursor in the ‘Runway’ Box, on therunway designator.Runways Box (Waypoint Page)8) Turn the FMS Joystick to display the desired runway (if more than one) forthe selected airport.
