Garmin G3X Pilot’s Guide 190-01115-00 Rev. G174Flight PlanningSystemOverviewFlightInstrumentsEISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilotAnnun/AlertsAppendixIndexIMPORTING/EXPORTING FLIGHT PLANSImporting flight plans:1) With a flight plan saved to the SD Card, press the FPL Key and turn theFMS Joystick to display the Flight Plan List Page.2) Press the IMPORT Softkey.3) Using the FMS Joystick highlight the desired flight plan to import.4) Press the IMPORT Softkey again and press the ENT Key.Exporting flight plans:1) Press the FPL Key and turn the FMS Joystick to display the Flight Plan ListPage.2) Press the FMS Joystick to activate the cursor, and turn or move the FMSJoystick to highlight the desired flight plan.3) Press the EXPORT Softkey and press the ENT Key.6.6 APPROACHES (WITHOUT EXTERNALNAVIGATOR CONFIGURED)WARNING: Do not use the approach information provided by the VFRnavigation database residing within the G3X as a means of navigating anyinstrument approach. The G3X VFR navigation database is limited to presentonly the waypoints for the final approach leg of a published procedure. Thesewaypoints and associated course line are made available for monitoringpurposes only.NOTE: This section is not applicable if an external GPS navigator is configured.Approach configuration is handled via the external GPS navigator’s controlsonly. Refer to the external GPS navigator’s Pilot’s Guide for more information.An approach can be loaded at any airport that has one available, and providessituational awareness for non-precision and precision approaches to airports withpublished instrument approach procedures. Only one approach can be loaded at atime in a flight plan. If an approach is loaded when another approach is already in theactive flight plan, the new approach replaces the previous approach.
