Garmin G3X Pilot’s Guide 190-01115-00 Rev. G46System OverviewSystemOverviewFlightInstrumentsEISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilotAnnun/AlertsAppendixIndexRestoring system setting defaults:1) Press the MENU Key twice to display the Main Menu.2) Turn or move the FMS Joystick to highlight ‘System Setup...’ and press theENT Key.3) Turn or move the FMS Joystick to highlight the desired menu option (DataBar Fields, Display, Date & Time, Position, or Alarms), and press the ENTKey.4) Press the MENU Key.5) With ‘Restore Default’ highlighted press the ENT Key.TRANSPONDERIf configured to ‘Set By Pilot’ in configuration mode, (refer to the Installation Manualfor configuration information) the pilot can change the Flight ID and enable/disableADS-B Transmit from the Transponder Setup Page.Setting the Flight ID:1) Press the MENU Key twice to display the Main Menu.2) Turn or move the FMS Joystick to highlight ‘System Setup...’ and press theENT Key.3) Turn or move the FMS Joystick to highlight ‘Transponder’, and press theENT Key.4) Move the FMS Joystick to highlight the ‘Flight ID’ Field.5) Use the FMS Joystick to enter the desired Flight ID and press the ENT Key.Enabling/disabling ADS-B Transmit:1) Press the MENU Key twice to display the Main Menu.2) Turn or move the FMS Joystick to highlight ‘System Setup...’ and press theENT Key.3) Turn or move the FMS Joystick to highlight ‘Transponder’, and press theENT Key.4) Move the FMS Joystick to highlight the ‘ADS-B Transmit’ Field.5) Turn the FMS Joystick to highlight ‘Enabled’ or ‘Disabled’.6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key toreturn to the previous page.
