Garmin G3X Pilot’s Guide190-01115-00 Rev. G 49System OverviewSystemOverviewFlightInstruments EISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilot Annun/Alerts Appendix IndexDISPLAYThe Backlight Intensity (display brightness) can be set to ‘Auto’ or ‘Manual’. ‘Auto’sets the Backlight Intensity based on the aircraft’s instrument lighting bus voltage.With ‘Manual’ selected, the pilot can manually adjust the desired backlight intensity(1-10). After each power cycle the Backlight Intensity is set to the default, which isconfigurable. Refer to the G3X Installation Manual for more information.Display Setup Page‘EISDisplayLocation’MenuOptionAdjusting backlight intensity:1) Press the MENU Key twice to display the Main Menu.2) Turn or move the FMS Joystick to highlight ‘System Setup...’ and press theENT Key.3) Turn or move the FMS Joystick to highlight ‘Display’, and press the ENTKey.4) Turn the FMS Joystick to highlight ‘Auto’.Or:a) Turn the FMS Joystick to highlight ‘Manual’.b) Move the FMS Joystick to highlight the desired Backlight Intensity(1-10).5) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key toreturn to the previous page.COLOR MODEThe Color Mode setting is used to adjust the color brightness used on the map andsynthetic vision display for day or night use.
