4-12 Garmin G500 Pilot’s Guide 190-01102-02 Rev. BForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndex4.4.1.2 Garmin Terrain-SVT™ Page Aviation DataSelect the display of Aviation data on the Garmin Terrain-SVT page. The PageMenu selections allow you to hide or show aviation data overlay on the Terrainor the Map Setup options for the Navigation Map pages.1) While viewing the Terrain page of the MAP page group, press MENU for Mapselections to hide or show aviation data overlay on the Terrain or the MapSetup options for the Navigation Map pages.Figure 4-12 Show/Hide Aviation Data on the Terrain-SVT Page2) Press ENT to save the highlighted value.4.4.1.3 Inhibiting/Enabling Garmin Terrain-SVT™ AlertingTerrain-SVT also has an inhibit mode that deactivates the PDA/FLTA auraland visual alerts. Pilots should use discretion when inhibiting Terrain-SVT andalways remember to enable the system when appropriate.Figure 4-13 Terrain-SVT Alerting Disabled (Alerts Inhibited) Annunciation (PFD & MFD)1) In MAP page group, turn the small MFD knob to reach the Terrain SVT Page.2) Press the INHIBIT soft key to inhibit or enable Terrain SVT (choice dependenton current state).OR1) Press the MENU key.2) Use the large or small MFD knob to highlight “Inhibit Terrain” or “EnableTerrain” (choice dependent on current state) and press the ENT key.
