5-11190-01102-02 Rev. B Garmin G500 Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex5.3 FliteCharts®FliteCharts® resemble the paper version of National Aeronautical ChartingOffice (NACO) terminal procedures charts. The charts are displayed with high-resolution and in color for applicable charts.FliteCharts database subscription is available from Garmin. Available dataincludes:• Arrivals (STAR)• Departure Procedures (DP)• Approaches• Airport Diagrams5.3.1 Cycle Number and RevisionFliteCharts data is revised every 28 days. Charts are still viewable during aperiod that extends from the cycle expiration date to the disables date. FliteChartsis disabled 180 days after the expiration date and are no longer available forviewing upon reaching the disables date. When turning on the GDU 620, thePower-up page indicates any of five different possible criteria for chart availability.These indications are whether the databases are not configured, not available,current, out of date, or disabled. See the table below for the various FliteChartsPower-up page displays and the definition of each.Power-up Page Display DefinitionBlank Line. G500 systemis not configured forFliteCharts. Contacta Garmin-authorizedservice center forconfiguration.System is configured forFliteCharts but no chartdatabase is installed.Refer to UpdatingGarmin Databases inAppendix A for theFliteCharts database.
