GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H7-14SECTION 7WPT PAGESAirport Arrival Page OptionsThe following options are available for the AirportArrival Page, by pressing the MENU Key:• Load into Active FPL? - Allows the pilot to loadthe selected arrival into the active flight plan.This is identical to loading an arrival procedurefrom the Procedures Page, as described in Section6.1.• Select Next FPL Apt? - This option is onlyavailable when a Flight Plan is active. Allows thepilot to view the available arrivals for the nextairport in the active flight plan• Select Destination Apt? - This option is onlyavailable when a Flight Plan is active. Allows thepilot to view the available arrivals for the activeflight plan destination airport.Loading an arrival procedure from theAirport Arrival Page:1) Select the desired arrival, transition, andrunway using the steps above.2) Press the MENU Key to display the AirportArrival Page Menu.3) Press the ENT Key to select the ‘Load intoActive FPL?’ option (Figure 7-27).Figure 7-27 Airport Arrival Page Menu4) The Active Flight Plan Page appears. Press theFPL Key to return to the Airport Arrival Page.To select any of the other options from the AirportArrival Page Menu, follow the preceding steps, but selectthe desired option in step 3.7.7 AIRPORT DEPARTURE PAGEThe Airport Departure Page (Figure 7-28) shows theavailable Airport Standard Instrument Departure (SID)procedures for the selected airport. Where multiplerunways or transitions are associated with the departureprocedure, that information may also be displayed. Amap image provides a layout diagram for each departure,runway, and transition.To view departure information for a particular airporton the Airport Departure Page, enter the airport’s identifierper Section 7.1.Figure 7-28 Airport Departure PageNumber of Pages inCurrent Page GroupPosition ofCurrent Pagewithin CurrentPage GroupCurrentPage GroupAirport Identifier,Symbol, and TypeMapImageDepartureProcedureNameTransitionsRunwayAssociated withDepartureScrolling through the available departures:1) Press the small right knob to activate thecursor.2) Turn the large right knob to place the cursoron the departure (DEP) procedure name field(Figure 7-28).