Garmin GPS 38 Owner's Manual

Also see for GPS 38: Declaration of conformity

43Using the Cursor to Mark and GOTO WaypointsDuring panning, the crosshair represents a target posi-tion right on the moving map, with the range and bearingto the target displayed at the top corners of the screen. Youcan also use the target crosshair to mark a new waypointposition or as a GOTO destination right from the map field.To mark the target crosshair position as a newwaypoint:1. Press the M key to capture the position.2. Enter a new name and route number if you wish.3. Press the E key to save the waypoint and return to themap page.You can also use the target crosshair as an instantGOTO destination. Similar to the MOB mode, this functionwill mark and instantly set a course for a new waypointcalled ‘MAP’.To go to the target crosshair:1. Press the G key to capture the position.2. Press the E key to confirm the MAP GOTO.If you want to save the MAP waypoint, be sure torename it, as it will be overwritten the next time a mapGOTO is executed.Marking a WaypointTo mark a new waypointwith the crosshair, simplypan to the desired positionand press the MARK key.MAPGOTOThe crosshair may also beused to define a GOTO des-tination by panning to thedesired position and press-ing the GOTOkey. If youwant to save the MAP way-point, be sure to rename it.REFERENCEUsing TheCursor OnThe Map