Garmin GPS 400 Pilot's Manual And Reference

Also see for GPS 400: Instructions Pilot's guide addendum Pilot's guide addendum Pilot's guide addendum Maintenance manual

Contents

Garmin GPS 400 Pilot's Manual And Reference Manual pdf 115 page image

GPS 400 Pilot’s Guide and Reference190-00140-60 Rev. E 6-13SECTION 6WPT PAGESAirport Departure Page OptionsThe following option is available for the AirportDeparture Page, by pressing the MENU Key:Load into Active FPL? allows the pilot to load theselected departure into the active flight plan. This isidentical to loading a departure procedure from theProcedures Page, as described in Section 5.1.Loading a departure procedure from theAirport Departure Page:1) Select the desired departure, runway, andtransition using the steps above.2) Press the MENU Key to display the AirportDeparture Page Menu.3) Press the ENT Key to select the ‘Load intoActive FPL?’ option (Figure 6-29).Figure 6-29 Airport Departure Page Menu4) The Active Flight Plan Page appears. Pressthe FPL Key to return to the Airport DeparturePage.6.8 INTERSECTION PAGEThe Intersection Page (Figure 6-30) displays thelatitude, longitude, region, and country for the selectedintersection. The Intersection Page also displays theidentifier, radial, and distance from the nearest VOR,VORTAC, or VOR/DME.Figure 6-30 Intersection PageIntersection Identifierand Symbol Region/Country Nearest VORand SymbolRadial andDistancefrom NearestVORLatitude/LongitudePositionNumber of Pages inCurrent Page GroupPosition ofCurrent Pagewithin CurrentPage GroupCurrent Page GroupThe following descriptions and abbreviations areused:• Position - Latitude/Longitude (degrees/minutes ordegrees/minutes/seconds), MGRS, or UTM/UPS• RAD - Radial from nearest VOR in degreesmagnetic or degrees true (depending upon unitconfiguration)• DIS - Distance from nearest VOR, in nauticalmiles/statute miles/kilometers (depending uponunit configuration)NOTE: The VOR displayed on the IntersectionPage is the nearest VOR, not necessarily the VORused to define the intersection.Intersections may only be selected by identifier, asdescribed in Section 6.1.