6 - WPT PAGES123Airport Arrivals4. Press ENT. The cursor moves to the transitions(TRANS) field.5. Turn the small right knob to display a windowof available transitions. Continue turning thesmall right knob to select the desired transi-tion.6. Press ENT. The cursor moves to the runwayfield.7. Turn the small right knob to display a windowof available runways. Continue turning thesmall right knob to select the desired runway.(“ALL” may appear in the runway field, indicat-ing the arrival procedure applies to all runways.For airports with parallel runways, “B” mayappear at the end of the runway designationto indicate the arrival procedure applies to bothrunways.)8. Press ENT. To remove the flashing cursor, pressthe small right knob.Airport Arrival Page OptionsThe following options are available for the airportarrival page, by pressing the MENU key:Load into Active FPL?As described earlier in this section.Select Next FPL Apt?As described earlier in this section.Select Destination Apt?As described earlier in this section.Airport Departure PageThe airport departure page shows the available Air-port Standard Instrument Departure (SID) proceduresfor the selected airport. Where multiple runways ortransitions are associated with the departure proce-dure, that information may also be displayed. A mapimage provides a layout diagram for each departure,runway and transition.Departure ProcedureNameAirport Identifier,Symbol and TypeMap ImageSixth Pagein WPT groupRunwaysAssociatedwithDepartureTransitionsTo scroll through the available departures:1. Press the small right knob to activate thecursor.
