4 - FLIGHT PLANS70Flight Plan Catalog OptionsCrossfillCrossfill? allows you to transfer a direct-to des-tination, the active flight plan, any stored flight planor user waypoints to a second 400W-Series or 500W-Series Garmin unit. Some crossfill operations can bedone automatically. If both units are set to “auto”, achange in the direct-to destination or active flight planon one unit will also be seen on the other.To crossfill flight plans between two 400W- or500W-Series Garmin units:1. Select the “Crossfill?” option from the flightplan catalog options and press ENT.2. Turn the large right knob to select the“Method” field.3. Turn the small right knob to select “Auto”or “Manual” and press ENT. “Auto” willautomatically transfer the active flight plan ordirect-to selection to another 400W- or 500W-series Garmin unit, without user intervention.4. If “Manual” is selected: Turn the large rightknob to select the “Transfer” field, then turnthe small right knob to select the type ofinformation to transfer between units (activeflight plan, flight plan, all user waypoints or asingle user waypoint). When “Flight Plan” or“User Waypoint” is selected, a second field willappear to the immediate right of the “Transfer”field. Use the small and large right knobs toenter the number of the flight plan or the nameof the user waypoint you wish to transfer.5. The “Cross-Side” field allows you to designatethe sending and receiving units in a crossfilloperation. Turn the large right knob to selectthe “Cross-Side” field, then turn the smallright knob, to select “To” or “From”. PressENT to confirm the selection.6. Turn the large right knob to highlight “InitiateTransfer?” and press ENT.Copying Flight PlansCopy Flight Plan? allows you to copy the selectedflight plan to a new flight plan location. The copyfunction is useful for duplicating an existing flight planbefore making changes. If you want to save a flightplan currently located in “flight plan 0”, be sure tocopy it to an open catalog location (1-19) before theflight plan is cancelled, overwritten or erased.To copy a flight plan to another flight plan cata-log location:1a. From the active flight plan page, press MENUto display the active flight plan optionswindow.or
